MA3300D CNC built-in electrostatic spray machine is one of the most outstanding products of Our Company. It overcomes the dead angle ability, one-time powder rate, automatic powder turning coating ability.
Any powder
Any whorkpiece
Any place
1.Easy to complete the groove, angle and other electrostatic shielding parts of the spray, the performance of the extraordinary coating effect
2.With the workpiece shape and distance changes automatically adjust the static output, without manual frequent adjustment
3.Advanced high-speed automatic follow control system, will automatically inhibit the fire before it occurs
4.The whole heat less, continuous work better stability, more competent 24 hours of continuous work
5.Digital display control system, while displaying the preset voltage, preset current
6.Preset voltage and preset current are quickly set by the knob, easy to operate and smooth
7.Preset settings exceed the reasonable limit automatic alarm reminder
8.Can be obtained under low pressure powder, get high spray speed
9.The machine circuit area independent closed to prevent dust from entering
10.Configure the low temperature does not stick powder powder quality powder, the use of light, easy to clean
| Nominal input voltage | 220 – 240 VAC |
| Frequency | 50 – 60 Hz |
| Temperature range | 0 °C – +40 °C |
| Power consumption | 50w |
| Security grade | IP54 |
| Max. Input pressure | 8bar |
| Min. input pressure (dynamic) | 4bar |
| Max. Water vapor content of compressed air | 1.3 g/Nm³ |
| Max. Oil vapor content of compressed air | 0.1 mg/Nm³ |
MESSAGEWe ask the service staff to always think about the customers, solve the problems of the equipment in time, and make sure that the interests of customers are above everything else.
