1.CLE-2FM with the 50L powder fluidized tank. New designed, ultra-efficient powder pump design employs the most effective angle to consistently deliver powder, resulting in optimized air consumption and less powder waste.
2.50L Stainless steel power barrel with fluidization
3.Easy cleaning of the container
1.CLE-2FM handlesany powder.
2.If continuous use of the same powder over a long period of time is the bulk of your production schedule, then we would recommend the CLE-2FMwith the 50-litre fluidized powder container.
3.Complex part geometries won’t slow you down. CLE-2FM simplifies the coating of difficult shapes by applying the powder precisely where needed.
1.Optimal powder cloud creation
2.No powder deposits
3.Seamless design
4.Low wear characteristics
5.Optimal material choice
6.Elimination of powder spitting
7.Quick color changes
| Nominal input voltage | Nominal input voltage |
| Frequency | 50 – 60 Hz |
| Temperature range | 0 °C – +40 °C |
| Max. Input pressure | 10 bar / 145 psi |
| Min. input pressure (dynamic) | 5.5 bar / 80 psi |
| Max. Water vapor content of compressed air | 1.3 g/Nm³ |
| Max. Oil vapor content of compressed air | 0.1 mg/Nm³ |
MESSAGEWe ask the service staff to always think about the customers, solve the problems of the equipment in time, and make sure that the interests of customers are above everything else.
