Batch Enameling furnace is for enamel daily necessities coating and sintering. It is suitable for daily used products such as Barbecue stove, grill, baking pan, gas hood, gas holder pot rack drying and burning of large quantities, multi-variety and multi-standard workpiece to make.
Barbecue stove, grill, baking pan, gas hood, gas holder pot rack.
1.It is suitable for drying and firing small-volume, multi-variety and multi-standard workpieces of enamel daily necessities.
2.Suitable for enamel daily necessities wet and static dry powder process conditions.
3. Japan Omron PLC programmable control appliance, the burner automatically performs multi-zone temperature control of large and small fires, which is very simple to operate and use, and greatly improves the energy-saving effect.
4. Easy maintenance and low repair costs.
5. The whole is a detachable assembly structure, which is convenient for transportation and movement.
| Curing oven | Inside size of the oven | L3500×W1200×H450mm/customize |
| Power | Heating power:220KW,assistant power:5kw | |
| Controlling temperature | 1 area; Oven temperature: normal temperature -950ºC adjustable; Curing powder temperature : 760-900 ºC | |
| Height of oven door | 450mm ,adjustable. The door up and down is automatic | |
| Heating elements | Working in 5 directions (right ,left ,front ,back and bottom. (OCr21Al6Nb) resistance band made with wave-like suspension in the furnace wall fixture (high temperature ceramic screw), the use of advanced hanging structure, high radiation efficiency, enhanced heat exchange in the furnace to improve the furnace thermal efficiency, and Extend the life of the heating element, installation, maintenance is very convenient. The bottom of the heating element with the same material spiral structure installed in the bottom of the brick, the surface laying 12mm thick silicon carbide board, easy to enter the post-maintenance. | |
| Curing frame(table) | Size：L3000*W800mm,
We can put 16 pieces of product on the frame once . Weight of the frame : 150kg Quantity:3 sets ,cycle working, Rotating is automatic while in and out is manual, ,( The bottom of the heated hearth is equipped with two high-temperature nickel-ene-enriched steel cast rails for the carriage) Material:SUS310 flat strip welded together ,resistant high temperature ,imported Using time:≥ 2years |
|
| Body of oven | The furnace is made of high quality Q235b steel plate and welded steel, the material name is channel steel, angle steel, steel plate and other welding. Its structure looks beautiful, durable, long-term use is not easy to deformation. The furnace is moved by the channel and the square steel welding, using the electric side shift | |
| The lining of oven | The lining is made of aluminum silicate full fiber structure, using high – quality aluminum silicate refractory fiber construction, using standard anchors and scientific and reasonable inlay method. The fiber folding block is pre-compressed before being set and fixed with an anchor on the shell. The structure has low thermal conductivity, low thermal solubility Excellent chemical stability, thermal stability, thermal shock resistance, excellent tensile strength and Corrosion resistance. Aluminum silicate fiber maximum temperature 1180 ℃ | |
| Electric controlling | 1). Furnace temperature control using SCR, with a radiator and a full set of air-cooled system. At the same time equipped with air switch and fastener for secondary protection. Each group of electric components set ammeter, voltmeter and electric components on and off instructions, with power interlock protection and safe grounding measures to ensure the use of safety.
2). The entire control system consists of two non-standard thermal control cabinet. The thermal control cabinet is located near the firing chamber. The control system must be placed in the air conditioning room. A thermal control cabinet is located in the furnace near the other, the other control cabinet is set in the user operating position, for the door lift, the material side of the centralized operation of the control. 3). Temperature control instrument using TCW-32A Shanghai Guolong intelligent instrument. 4). Electric control cabinet from the firing room should not exceed 5 meters, in order to save cable costs, reduce line loss. 5). The function buttons, knobs are equipped with nameplate, simple operation. 6). Thermal control cabinet low voltage electrical appliances are used in China Zhengtai brand 7) The door up and down is electric control 8) The frame rotated is electric control,while the frame pushed and pulled manually |
|
| Component | 1.Chamber of oven :1 set ,including rail
2.High temperature thermocouple ：2 bars,(We will offer one piece for free) 3.Feeding machine:1 set 4.Stainless steel barbecue frame:3 sets 5.Control cabinet:2 sets 6.Relevant information: 1 set |
|
| Feature | 1) Furnace with high temperature pre-compression aluminum silicate full fiber structure, stop furnace easy to open. Replace the old-fashioned refractory brick furnace structure.
2) The use of resistance with the resistance wire radiation heating to replace the coal structure, equipment, no emissions, no pollution, fully meet the requirements of environmental protection. 3) Can choose the low price of electricity concessions during the furnace can significantly reduce the power consumption, directly reduce electricity. 4) Can be more specifications combined firing, improve production efficiency. 5) For enamel products in large quantities, multi-species, multi-standard high-temperature firing of the work piece. 6) Temperature control instrument digital display temperature and the actual temperature of the furnace, automatic PID temperature control, operation, use is very simple, while greatly improving the energy efficiency. 7) Easy maintenance, low repair costs. |
MESSAGEWe ask the service staff to always think about the customers, solve the problems of the equipment in time, and make sure that the interests of customers are above everything else.
