High Quality Automatic Powder Coating Reciprocator is designed for automatic electrostatic powder coating, enameling and wet spraying applications. The construction and performance are designed to high continual load everyday operational conditions. Perfect coating is achieved with easy adjustment of stroke and speed to meet production needs. The automatic powder coating Reciprocator is used for smooth movements of powder spray guns for Application of Powder Coating at Uniform Speed.
Generally used for furniture spraying, hardware spraying, electronic shell spraying, auto parts spraying, aluminum Profiles spray etc. Especially for the workpiece shape is relatively flat, uniform surface spraying, automated production, saving human resources, and mass production.
1.Mitsubishi frequency converter, integrated transducer and worm gear. Make sure the process reliable and steadily.
2.Digital operation panel could preset 80 sets mode data for backup.
3.You could preset the Max and Min limits according to the working conditions so that avoid the knocking.
4.You could preset automatic running when open the electric power.
5.There are 8 sets of polyurethane roller inside to hold the direction guide pillar, work stable, abrasion rate low.
Voltage | AC220V-240V/ 50-60Hz |
Frequency | 750W |
Speed | 0.08-0.8m/s |
Maximum stroke | 2.1m |
Control method | Control method: digital button( digital control panel) |
Reduction gear | worm and gear (maintenance-free aluminum) |
Speed governing | frequency converter (Mitsubishi) |
Memory function | 80 pre-stored spraying programs |
Telecontrol | Set on /off for auto-run after power |
Securit | Set the highest and lowest peak to prevent error performance |
Operation security | 2 anti-dumping rod setting on the base |
Transfer method | Synchronous belt drive, low noise, long service life, lubrication-free |
Guide method | 8 polyurethane rollers |
Horizontal adjustment | 4 corners of the base can be adjust height respectively |
Solid base | the base with 4 fixed expansion screws |
Horizontal motion | Manual |
Horizontal locking | Manual |
Surface treatment | electrostatic powder coating |
Working temperature | -10℃ – 50℃ |